Kidde Firex Plug-In Explosive Gas and Carbon Monoxide Detector, 9V Battery Backup 21029623 21029623

Kidde Firex Plug-In Explosive Gas and Carbon Monoxide Detector, 9V Battery Backup 21029623 21029623

Protect your family with the Kidde Firex Carbon Monoxide, Propane, Natural and Explosive Gas Detector, Hardwired with Battery Backup. The easy to install electrochemical Kidde Firex Carbon Monoxide, Propane, Natural and Explosive Gas Detector, operates by plugging the carbon monoxide alarm into a typical wall outlet. A 9-volt alkaline battery provides backup during power outages. Using electrochemical sensor technology, the Kidde Firex Carbon Monoxide, Propane, Natural and Explosive Gas Detector alerts to poisonous, invisible, combustible gases. The Kidde Firex Carbon Monoxide, Propane, Natural and Explosive Gas Detector has 3 LED lights that indicate: power connection, if the alarm senses combustion, fire, or smoke, or if the alarm is activated. The display will have a red dot in the lower, right corner that will blink to indicate normal operation. The gas alarm includes a test button that will electronically simulate the presence of CO or gas when pushed. When the unit detects carbon monoxide the alarm pattern will be 4 quick beeps and show in the display the carbon monoxide concentration in Parts Per Million. When the unit detects gas, the word “GAS” will be displayed and an alarm will sound. UL Certified with a 5-year limited warranty. Meets requirements of UL 2034.

Highlights

• UL/CSFM ref. kidde part i12040
• Plug-in with a 9-volt battery back-up
• Test/reset button – tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Electrochemical sensor technology – detects invisible, poisonous carbon monoxide & other combustible gases
• Red dot in lower right corner indicates power is connected
• Digital display provides a readout of gas or carbon monoxide detection in parts per million (PPM)
• Replacement Chirp – alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected

Specifications

Dimensions