KRAUS KWT320-28-18 Loften 28 in. Drop-in/Undermount Single Bowl Stainless Steel Kitchen Workstation Sink with Accessories
Engineered with an integrated ledge to support sliding accessories, Loften PRO sinks create a multifunctional workspace to streamline your kitchen tasks. Kit includes cutting board and roll-up dish rack that allow you to work over the sink without losing counter space. Made with durable and dent-resistant T304 stainless steel that stands up to all your kitchen needs. Dual-mount design allows you to install this sink as an undermount or drop-in with any type of kitchen counter. Thick NoiseDefend sound dampening pads create an ultra-quiet experience. Wear-resistant finish is easy to clean and not prone to corrosion, while rounded corners on the sink bottom reduce buildup over time. Installation-ready sink comes with protective stainless steel bottom grid and drain assembly with cover.
- WORKSTATION SINK: An integrated ledge allows you to slide accessories across the sink so you can prep, serve, and clean up without losing any workspace on the kitchen counter
- DIMENSIONS: OUTER SINK DIMENSIONS: 28″ L x 22″ W x 9 1/2″ D – BOWL DIMENSIONS: 26″ L x 16″ W x 9″ D – MINIMUM CABINET SIZE: 30″
- SINK KIT INCLUDES: Stainless steel workstation sink, heavy-duty acacia hardwood cutting board, roll-up dish drying rack, protective stainless steel bottom grid, drain assembly with decorative cover
- HIGH-PERFORMANCE STEEL: Engineered for superior durability with T304 stainless steel for a wear-resistant sink that prevents dents and damage, stands up to heavy use even in the busiest kitchens
- SPACIOUS SINGLE BOWL: High-capacity sink with rear off-set drain creates an uninterrupted surface with generous workspace for large cookware and stacks of dishes, increases storage space underneath the sink
- DUAL MOUNT DESIGN: This versatile sink can be installed either as undermount or top mount with any kind of kitchen countertop for design flexibility in any kitchen
- SUPERIOR DRAINAGE: Rear-offset drain opening and sloped bottom with channel grooves help prevent water from pooling in the sink – OPTIMIZED SLOPE on the bottom of the sink helps keep your fragile stemware from tipping over
- ULTRA-QUIET SINK: NoiseDefend sound dampening technology with large super-silencer pads on all sides of the sink helps prevent noise and vibration from dishes and garbage disposals
- FULLY INSULATED with anti-condensation undercoating to reduce the risk of moisture build-up, helping prevent damage to sink and cabinets
- HEAVY-DUTY CUTTING BOARD made with durable ACACIA hardwood creates a stylish accent to your sink – not prone to cracking or warping, with a non-slip design and built-in grooves that prevent spills – Easy to clean non-porous surface is resistant to odors and stains
- ROLL-UP DISH DRYING RACK made with heavy-duty stainless steel and non-slip silicone is perfect for drying dishes right over the sink. Holds up to 85 lbs., dishwasher-safe, heat-safe, and rolls up for easy storage
- STAINLESS STEEL BOTTOM GRID with soft rubber bumpers promotes better draining and helps protect the surface of your sink from scratches and dents by keeping dishes elevated
- MATCHING DRAIN ASSEMBLY W/ COVER: Premium stainless steel drain assembly with strainer helps keep your drainpipe free of debris. Removable decorative cover conceals drain opening and garbage disposal for a clean look
- WEAR-RESISTANT SATIN FINISH easily stands up to everyday use; resists rust, corrosion, and fading
- EASY TO CLEAN with rounded corners on the bottom of the sink to prevent buildup over time – Straight sidewalls and 90° angles maximize usable workspace in the sink bowl and create a clean modern look
- INSTALLATION-READY KIT includes all mounting hardware and cut-out template for easy DIY installation
- LIFETIME LIMITED WARRANTY and top-rated Customer Service team so you can choose KRAUS products with confidence
- RECOMMENDED ACCESSORIES (sold separately): Enhance the functionality of your sink with a selection of Workstation Accessories like the drying rack (KDR-3) or expandable kitchen sink caddy (KCD-1/KCD-2)
Dimensions
Bowl 1 Front to Back Width (in.) | 16 in | Bowl 1 Left to Right Length (in.) | 26 in |
---|---|---|---|
Bowl 1 Top to Bottom Depth (in.) | 9 in | Sink Front to Back Width (in.) | 22 in |
Sink Left to Right Length (in.) | 28 in | Sink Top to Bottom Depth (in.) | 9.5 in |
Details
Bundle Type | Workstation Sink w/Accessories | Color Family | Silver |
---|---|---|---|
Color/Finish | Stainless Steel | Drain Location | Rear |
Faucet Included | Without Faucet | Features | Corrosion Resistant, Heat Resistant, Insulated, Sound Dampening, Tight/Zero Radius, Workstation |
Included | Bottom Grids, Cutting Board, Drain Cap, Mounting Hardware, Rolling Drying Rack, Strainer | Kitchen Product Type | Kitchen Sink |
Minimum Cabinet Size (in.) | 30 | Mount Type | Drop-In/Undermount |
Number of Bowls | Single Bowl | Number of Faucet Holes | 1 |
Product Weight (lb.) | 22.15 lb | Remote Access | No Remote Access |
Sink Shape | Rectangular | Sink Finish Type | Satin |
Sink Gauge | 18 Gauge | Sink Material | Stainless Steel |
Reviews
There are no reviews yet.